+62 21 6123891 / Mobile: +62 812 8437 7989


The RB800 is an advanced high performance wireless platform. It has four miniPCI slots, three Gigabit ethernet ports, two daughterboard connectors (one PCI and one PCI-e), a miniPCI-e slot and a compact flash slot. 

The two daughterboard connectors allow you to expand the number of wired and wireless ports, and the new high power CPU is capable of supporting them all. 

RB800 has daughterboard connector, so you have a lot of expansion possibilities. You can buy RB502 to add two miniPCI slots, RB604 to add four miniPCI slots or RB816 to add 16 Ethernet ports! 

This is the new definition of wireless networking power. Combined with RouterOS – RB800 is the most powerful and sophisticated wireless router, firewall and bandwidth manager.

Product specifications :
Product code RB800
CPU nominal frequency 800 MHz
CPU core count 1
Architecture PPC
Size of RAM 256 MB
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 3
MiniPCI slots 4
MiniPCI-e slots 1
Number of USB ports 0
Memory Cards 1
Memory card type CF
Power Jack 1
802.3af support Yes
PoE in 802.3af
Supported input voltage 10 V – 57 V
PoE out No
Voltage Monitor Yes
CPU temperature monitor Yes
PCB temperature monitor No
Dimensions 14cmx20cm
Operating temperature range -60°C .. +70°C tested
License level 6
Antenna gain DBI No
Current Monitor No
SFP ports 0
SFP+ ports 0
Number of chains 0
Serial port RS232
Performance test results :
RB800 MPC8533 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 243.5 2,957.1 330.4 1,353.3 883.8 452.5
Bridging 25 bridge filter rules 162.3 1,971.0 185.3 759.0 187.4 95.9
Routing none (fast path) 243.5 2,957.1 330.0 1,351.7 755.4 386.8
Routing 25 simple queues 205.0 2,489.5 294.4 1,205.9 303.2 155.2
Routing 25 ip filter rules 121.4 1,474.3 122.9 503.4 122.6 62.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure RB800