+62 21 6123891 / Mobile: +62 812 8437 7989

RB433

Three miniPCI slots and three Ethernet ports give you enough connectivity options to use the RB433 as the central part of your network. 

A wireless repeater plus a local access point, or an AP with multiple sectors – it’s all up to you, all of it is made possible by the RB433.

Product specifications :
Details
Product code RB433
CPU nominal frequency 300 MHz
CPU core count 1
Architecture MIPS-BE
Size of RAM 64 MB
10/100 Ethernet ports 3
10/100/1000 Ethernet ports 0
MiniPCI slots 3
MiniPCI-e slots 0
Memory Cards 0
Number of USB ports 0
Power Jack 1
802.3af support No
PoE in Yes
Supported input voltage 10 V – 28 V
PoE out No
Voltage Monitor No
CPU temperature monitor No
PCB temperature monitor No
Operating temperature range -40°C .. +70°C tested
License level 4
Antenna gain DBI No
Current Monitor No
CPU AR7130-BC1A
SFP ports 0
SFP+ ports 0
Number of chains 0
Serial port RS232
Performance test results :
RB433 AR7130 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 16.2 196.7 47.0 192.5 97.3 49.8
Bridging 25 bridge filter rules 16.2 196.7 40.6 166.3 41.0 21.0
Routing none 16.2 196.7 47.0 192.5 79.4 40.7
Routing 25 simple queues 16.2 196.7 47.0 192.5 67.8 34.7
Routing 25 ip filter rules 16.2 196.7 28.9 118.4 24.7 12.6
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure RB433