+62 21 6123891 / Mobile: +62 812 8437 7989

RB411GL

The RB411GL is created for high-end wireless AP, Point-to-Point or CPE OEM applications. It has Gigabit Ethernet port, so you can take full advantage of 802.11n standard. 

Unit has one miniPCI slot for your choice of miniPCI wireless card, powerful Atheros 680MHz CPU, 64MB of RAM and a USB port for 3G or storage.

Product specifications :

Details
Product code RB411GL
CPU nominal frequency 680 MHz
CPU core count 1
Architecture MIPS-BE
Size of RAM 64 MB
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 1
MiniPCI slots 1
MiniPCI-e slots 0
Number of USB ports 1
Power Jack 1
802.3af support No
PoE out No
Supported input voltage 8 V – 30 V
PoE in Yes
Voltage Monitor Yes
CPU temperature monitor No
PCB temperature monitor No
Dimensions 105x105mm
Operating System RouterOS
Operating temperature range -40°C .. +70°C tested
License level 4
Antenna gain DBI No
Current Monitor No
CPU AR7161-BC1A
SFP ports 0
SFP+ ports 0
USB slot type USB type A
Number of chains 0
Serial port None

Performance test results :

RB411GL AR7161 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 58.0 704.4 171.9 704.1 187.3 95.9
Bridging 25 bridge filter rules 58.5 710.4 84.5 346.1 86.4 44.2
Routing none 59.7 725.0 136.1 557.5 147.0 75.3
Routing 25 simple queues 55.2 670.3 117.7 482.1 137.0 70.1
Routing 25 ip filter rules 54.7 664.3 59.4 243.3 59.2 30.3
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure RB411GL