+62 21 6123891 / Mobile: +62 812 8437 7989

RB411

The RB411 is designed with size and cost in mind. This small device will fit perfectly into small CPE devices or even run your wireless backup link. The powerful Atheros CPU gives it the ability to do all of this and more. 

The RB411 includes RouterOS – the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager.

Product specifications :
Details
Product code RB411
CPU nominal frequency 300 MHz
CPU core count 1
Architecture MIPS-BE
Size of RAM 32 MB
10/100 Ethernet ports 1
10/100/1000 Ethernet ports 0
MiniPCI slots 1
MiniPCI-e slots 0
Memory Cards 0
Number of USB ports 0
Power Jack 1
802.3af support No
Supported input voltage 8 V – 28 V
PoE in Yes
PoE out No
Voltage Monitor No
PCB temperature monitor No
CPU temperature monitor No
Operating temperature range -40°C .. +70°C tested
Antenna gain DBI No
Current Monitor No
CPU AR7130-BC1A
SFP ports 0
SFP+ ports 0
Number of chains 0
Serial port RS232

Performance test results :

RB411 AR7130 100M 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 8.1 98.6 23.5 96.3 97.3 49.8
Bridging 25 bridge filter rules 8.1 98.6 23.5 96.3 41.0 21.0
Routing none 8.1 98.6 23.5 96.3 79.4 40.7
Routing 25 simple queues 8.1 98.6 23.5 96.3 67.8 34.7
Routing 25 ip filter rules 8.1 98.6 23.5 96.3 24.7 12.6
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure RB411