+62 21 6123891 / Mobile: +62 812 8437 7989

RBQRTG-2SHPnD (QRT 2)

The QRT-2 is rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 17dBi antenna and a super high power 2Ghz wireless transmitter.

Inside is a new dual chain wireless device, with high performance, high output power wireless transmitter, and a Gigabit Ethernet port, to fully utilize the benefit of 802.11n high speed wireless.

Easy to use and quick to deploy, QRT is ideal for point-to-point links.

Product specifications :
Details
Product code RBQRTG-2SHPnD
CPU nominal frequency 400 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 1
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9582-AR1A-R
Wireless standards 802.11b/g/n
Number of USB ports 0
Power Jack 0
Supported input voltage 8 V – 30 V
PoE in Yes
PoE out No
Voltage Monitor Yes
CPU temperature monitor No
PCB temperature monitor Yes
Dimensions 309x230x50mm
Operating System RouterOS
License level 4
Antenna gain DBI 17
Current Monitor No
CPU AR7242-AH1A-R
Max Power consumption 19W
SFP ports 0
SFP+ ports 0
Number of chains 2
Serial port None
Wireless specifications :
2.4 GHz
TX RX
1MBit/s 35 -100
11MBit/s 35 -94
6MBit/s 35 -96
54MBit/s 28 -78
MCS0 35 -96
MCS7 27 -75
Performance test results :
RBQRTG-2SHPnD AR7242 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.2 986.1 178.4 730.9 194.0 99.3
Bridging 25 bridge filter rules 51.5 625.5 52.3 214.3 53.7 27.5
Routing none (fast path) 81.2 986.1 167.0 684.0 183.7 94.1
Routing 25 simple queues 81.2 986.1 88.5 362.4 92.8 47.5
Routing 25 ip filter rules 37.6 457.0 38.4 157.1 37.5 19.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure QRT 2