+62 21 6123891 / Mobile: +62 812 8437 7989

RBmAP2n (mAP 2n)

The mAP (micro Access Point) is a tiny size wireless 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources – USB, Passive PoE and power jack. It also works as a PoE injector – the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.

Product specifications :
Details
Product code RBmAP2n
CPU nominal frequency 400 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 2
10/100/1000 Ethernet ports 0
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9331-AL1A
Wireless standards 802.11b/g/n
Number of USB ports 1
Power Jack 1
802.3af support no
PoE out Yes
PoE in Yes
Supported input voltage 10 V – 57 V
Voltage Monitor No
CPU temperature monitor No
PCB temperature monitor No
Dimensions 68x68x19mm
Operating System RouterOS
Operating temperature range -10C to +70C tested
License level 4
Antenna gain DBI 1.2
Current Monitor No
CPU AR9331-AL1A
Max Power consumption 2W
SFP ports 0
SFP+ ports 0
USB slot type microUSB type AB
Number of chains 1
Serial port None
Wireless specifications :
2.4 GHz
TX RX
1MBit/s 17 -96
11MBit/s 17 -88
6MBit/s 15 -92
54MBit/s 11 -73
MCS0 15 -92
MCS7 10 -70
Performance test results :
RBmAP2n AR9331 100M 2 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 16.2 196.7 47.0 192.5 146.7 75.1
Bridging 25 bridge filter rules 16.2 196.7 47.0 192.5 49.6 25.4
Routing none (fast path) 16.2 196.7 47.0 192.5 142.4 72.9
Routing 25 simple queues 16.2 196.7 47.0 192.5 80.3 41.1
Routing 25 ip filter rules 16.2 196.7 35.7 146.2 35.8 18.3
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure mAP 2n