+62 21 6123891 / Mobile: +62 812 8437 7989

RBcAP2n (cAP 2n)

RouterBOARD cAP-2n (ceiling Access Point) is our first 2.4GHz ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.

cAP-2n supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.

Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.

Product specifications :
Details
Product code RBcAP2n
CPU nominal frequency 400 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 1
10/100/1000 Ethernet ports 0
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9331-AL1A
Wireless standards 802.11b/g/n
Number of USB ports 0
Power Jack 0
PoE in Passive
Supported input voltage 11 V – 57 V
PoE out No
Voltage Monitor No
PCB temperature monitor No
CPU temperature monitor No
Dimensions 185mm diameter, 31mm heigh
Operating System RouterOS
Operating temperature range -30C to +70C
License level 4
Antenna gain DBI 2
Current Monitor No
CPU AR9331-AL1A
Max Power consumption 2W
SFP ports 0
SFP+ ports 0
Number of chains 1
Serial port None
Wireless specifications :
2.4 GHz
TX RX
1MBit/s 17 -96
11MBit/s 17 -88
6MBit/s 15 -92
54MBit/s 11 -73
MCS0 15 -92
MCS7 10 -70
Performance test results :
RBcAP2n AR9331 100M 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 146.7 75.1
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 49.6 25.4
Routing none (fast path) 8.1 98.4 23.5 96.3 142.4 72.9
Routing 25 simple queues 8.1 98.4 23.5 96.3 80.3 41.1
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 35.8 18.3
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure cAP 2n