+62 21 6123891 / Mobile: +62 812 8437 7989

RB911G-5HPnD-QRT (QRT 5)

The QRT 5 is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter.

Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless.

Easy to use and quick to deploy, QRT is ideal for point to point links.

Product specifications :
Details
Product code RB911G-5HPnD-QRT
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports None
10/100/1000 Ethernet ports 1
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9342-BL1A
Wireless standards 802.11a/n
Number of USB ports 0
Power Jack 0
PoE in Yes
PoE out No
Supported input voltage 8 V – 30 V
Voltage Monitor Yes
CPU temperature monitor No
PCB temperature monitor Yes
Dimensions 309x320x50mm
Operating System RouterOS
License level 4
Antenna gain DBI 24
Current Monitor No
CPU AR9342-BL1A
Max Power consumption 11W at 24V
SFP ports 0
SFP+ ports 0
Number of chains 2
Serial port None
Wireless specifications :
5 GHz
TX RX
6MBit/s 30 -96
54MBit/s 27 -78
MCS0 30 -96
MCS7 26 -75
Performance test results :
RB911G-5HPnD-QRT AR9342 1G 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.0 983.7 232.0 950.3 269.6 138.0
Bridging 25 bridge filter rules 81.0 983.7 86.0 352.3 87.6 44.9
Routing none (fast path) 81.0 983.7 210.0 860.2 226.9 116.2
Routing 25 simple queues 81.0 983.7 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 56.8 689.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure QRT 5