+62 21 6123891 / Mobile: +62 812 8437 7989

RBSXTG-5HPacD-SA (SXT SA5 ac)

The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and 80MHz channels. 802.11a/n/ac opens up new possibilities and speeds never possible before.

The SXT ac is a new member in our 802.11ac product lineup, currently two models are available — with regular 28 degree antenna, and the SA model with a 90 wide beam- width sector antenna. Also supports 802.11a/n mode and is compatible with all legacy RouterBOARD devices, including Nstream and Nv2 protocols. Both devices come with Gigabit Ethernet.

New products are backwards compatible- for example, you can replace your 5GHz 802.11an legacy Access Point with new 802.11ac product and your existing customers will still be able to connect to it.

Product specifications :
Details
Product code RBSXTG-5HPacD-SA
CPU nominal frequency 720 MHz
CPU core count 1
Size of RAM 128 MB
10/100 Ethernet ports None
10/100/1000 Ethernet ports 1
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model QCA9882-BR4A-R
Wireless standards 802.11a/n/ac
Number of USB ports 1
Power Jack 0
Supported input voltage 12 V – 57 V
PoE in Passive
PoE out No
Voltage Monitor Yes
PCB temperature monitor Yes
CPU temperature monitor No
License level 4
Antenna gain DBI 13
Current Monitor No
CPU QCA9557-AT4A-R
Max Power consumption 12W
SFP ports 0
SFP+ ports 0
USB slot type USB type A
Supported Voltage 15-60V
Number of chains 2
Serial port None
Wireless specifications :
5 GHz
TX RX
6MBit/s 31 -96
54MBit/s 28 -81
MCS0 30 -96
MCS7 27 -77
MCS9 22 -72
Performance test results :
RBSXTG-5HPacD-SA QCA9550 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 162.4 1,972.2 170.8 699.6 370.2 189.5
Bridging 25 bridge filter rules 162.4 1,972.2 111.8 457.9 99.9 51.1
Routing none (fast path) 162.4 1,972.2 317.4 1,300.1 370.2 189.5
Routing 25 simple queues 162.4 1,972.2 174.2 713.5 176.2 90.2
Routing 25 ip filter rules 60.2 731.1 62.8 257.2 61.8 31.6
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure SXT SA5 ac