+62 21 6123891 / Mobile: +62 812 8437 7989

RBSXT5HPnDr2 (SXT 5)

SXT 5 is a low cost, high transmit power 5GHz outdoor wireless device. Up to 1250mW transmit power! SXT 5 can be used for point to point links or as a CPE for point to multipoint installations. 

Complete with a ready to mount enclosure and built-in 16dBi antenna, the package contains everything you need to make a point to point link, or connect to an AP. 

Box contains: one SXT 5, PoE injector, 24V power adapter, mounting bracket, metallic mounting loop.

Product specifications :
Details
Product code RBSXT5HPnDr2
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 64 MB
Architecture MIPS-BE
10/100 Ethernet ports 1
10/100/1000 Ethernet ports 0
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9344-DC3A-R
Wireless standards 802.11a/n
Number of USB ports 1
Memory Cards 0
Power Jack 0
802.3af support 0
PoE out No
Supported input voltage 5 V – 30 V
PoE in Yes
Voltage Monitor Yes
CPU temperature monitor No
PCB temperature monitor Yes
Dimensions 140x140x56mm, 265g
Operating System RouterOS
Operating temperature range -30 .. +70C
License level 3
Antenna gain DBI 16
Current Monitor No
CPU AR9344-DC3A-R
Max Power consumption 11W
SFP ports 0
SFP+ ports 0
USB slot type USB type A
Number of chains 2
Serial port None
Wireless specifications :
5 GHz
TX RX
6MBit/s 30 -96
54MBit/s 27 -81
MCS0 30 -96
MCS7 26 -77
Performance test results :
RBSXT5HPnDr2 AR9344 100M 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 148.0 75.8
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 87.6 44.9
Routing none (fast path) 8.1 98.4 23.5 96.3 148.0 75.8
Routing 25 simple queues 8.1 98.4 23.5 96.3 106.6 54.6
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure SXT 5