+62 21 6123891 / Mobile: +62 812 8437 7989

RB2011iL-IN

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. 

The RB2011iL-IN is the most basic model, with five Gigabit ethernet ports, five Fast ethernet ports, power jack and PoE support. 

It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license. 

There is PoE output function for port #10 – it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. 

RouterBOARD 2011iL-IN comes with desktop enclosure and power supply. 

Wall mount kit for network closet is available for purchase as an optional accessory.

Product specifications :

Details
Product code RB2011iL-IN
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 64 MB
Architecture MIPS-BE
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 5
MiniPCI slots 0
MiniPCI-e slots 0
Number of USB ports 0
Power Jack 1
Supported input voltage 8 V – 30 V
PoE in Yes
PoE out Yes
Voltage Monitor No
PCB temperature monitor No
CPU temperature monitor No
Dimensions 214x86mm
Operating temperature range -35C to +65C
License level 4
Antenna gain DBI No
Current Monitor No
CPU AR9344-DC3A-R
Max Power consumption 6W
SFP ports 0
SFP+ ports 0
Number of chains 0
Serial port None

Performance test results :

RB2011iL-IN AR9344 1G&100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 122.0 1,481.6 232.0 950.3 269.6 138.0
Bridging 25 bridge filter rules 83.6 1,015.2 86.0 352.3 87.6 44.9
Routing none (fast path) 122.0 1,481.6 210.0 860.2 226.9 116.2
Routing 25 simple queues 100.5 1,220.5 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 56.8 689.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure RB2011iL-IN