+62 21 6123891 / Mobile: +62 812 8437 7989

CCR1009-8G-1S-1S+

The CCR1009 is a powerful Ethernet router based on the cutting edge TILERA 9 core CPU.
CCR1009-8G-1S-1S+ comes with 2GB of RAM, eight Gigabit Ethernet ports (Ether1-4 are in a Switch group), one SFP port and one SFP+ port with 10G support (SFP module not included).
CCR1009-8G-1S-1S+ model have dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically).
Also, CCR1009-8G-1S-1S+ supports a Smart card, to store your private key for use in all features that support Certificate based authentication.
SFP+ port supports SFP (1.25G) modules as well.

Product specifications :

Details
Product code CCR1009-8G-1S-1S+
CPU nominal frequency 1.2 GHz
SFP DDMI Yes
CPU core count 9
Architecture TILE
Size of RAM 2 GB
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 8
MiniPCI slots 0
MiniPCI-e slots 0
Number of USB ports 1
Power Jack 2
802.3af support No
Supported input voltage 14 V – 57 V
PoE in Yes
PoE out No
Voltage Monitor Yes
CPU temperature monitor Yes
PCB temperature monitor Yes
Dimensions 444x175x47mm
Operating System RouterOS
Operating temperature range -20C .. +60C
License level 6
Antenna gain DBI No
Current Monitor Yes
CPU TLR4-00980CG-10CE
Max Power consumption 35W
SFP ports 1
SFP+ ports 1
USB slot type microUSB type AB
Number of chains 0
Serial port RS232 + Header

Performance test results :

CCR1009-8G-1S-1S+ Tile 9 core all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 975.1 11,841.6 2,819.3 11,547.9 14,512.4 7,430.3
Bridging 25 bridge filter rules 975.1 11,841.6 1,312.8 5,377.2 1,357.6 695.1
Routing none (fast path) 975.1 11,841.6 2,819.3 11,547.9 11,105.0 5,685.8
Routing 25 simple queues 975.1 11,841.6 1,788.6 7,326.1 1,850.1 947.3
Routing 25 ip filter rules 813.8 9,882.8 883.3 3,618.0 907.9 464.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Brochure CCR1009-8G-1S-1S+